Pall Corporation Homepage: Filtration, Separations, Purification, and Environmental Technology
Home
1.866.905.7255 (USA)
EMAIL USCONTACT US

Seitz® K–Series Depth Filter Sheets

Seitz® K–Series Depth Filter Sheets
With 13 different retention rates the K-series represents the standard depth filter sheet series of Pall SeitzSchenk Filtersystems. These sheets consist of a cellulose matrix which contains very fine kieselguhr mixtures and perlite as filtration-active substances.

The SEITZ-EKS, the SEITZ-EK 1 and the SEITZ-EK are used for sterilising filtration duties, whereas the SEITZ-KS 50 and SEITZKS 80 are classified as micro-organism-reducing depth filters. They can produce a sterile filtrate at low organism counts in the unfiltered product. K 100 through to K 900 cover the entire range from fine filtration via clarifying filtration to coarse filtration.

High Efficiency Bioburden Reduction

Successful bioburden reduction to achieve very low organism counts necessitates knowledge of the microbiological status of the product. The filtration procedure has to be adapted in such a way that the organism challenge limit validated for a particular depth filter sheet is not exceeded. Differential pressure must be limited to a maximum of 1.5 bar (14.5 psi)
The flow velocity should not exceed 500 L/m2 /h. These figures may be lower in the case of difficult or demanding products.

To obtain assurace of sterile filtrate through a sterilizing membrane filter cartridge, downstream of depth filter sheets is essential. ,br>

Typical LRV Figures (Log Reduction Value)

EKS > 8.5(1)

EK 1 > 7.5(1)
EK >7.0(2)

KS 50 >6.5(2)

KS 80 > 6.0(2)

1 Test organisms: Brevundimonas diminuta.
2 Test organisms: Serratia marcescens.