Description
Ultipor® HT filters have a pleated, high area construction for long service life. The unique medium structure consists of a high temperature binder resin which coats the fine glass fibers. The filter's materials of construction are qualified for uses up to 425°F/218°C with compatible fluids. The double open ended filters are installed over a tie rod/seal nut assembly. The flow pattern is outside to inside.
Benefits
- Optimized pleat pack filtration helps to develop filter cake
- Batch to batch consistency
- Core collapse pressure rated to 75 psid/5.17 bard at 425°F/218°C
- Rated at 99% efficiency with retention ratings of 20 micron (µm)1
- Able to process tough oil fractions, containing fine suspended solids
- Large surface area provides long service life
1 - The test procedure used is an adaptation of ISO 16889, modified to determine
the micron size above which particles are quantitatively removed.
