Test Methods

The data presented in this chart is a compilation of testing by Pall Corporation with certain chemicals, manufacturer’s data, or compatibility recommendations from the Compass Corrosion Guide by Kenneth M. Pruett. This data is intended to provide expected results when filtration devices are exposed to chemicals under static conditions for 48 hours at 25 °C (77 °F), unless otherwise noted. Membrane integrity for syringe filters was tested by bubble point.

This chart is intended only as a guide. Accuracy cannot be guaranteed. Users should verify chemical compatibility with a specific filter under actual use conditions. Chemical compatibility with a specific filter under actual use conditions is affected by many variables including temperature, pressure, concentration, and purity. Various chemical combinations prevent complete accuracy.

Select below to view chemical compatibility charts for various Pall laboratory products.
Media Materials 
Housing Materials 
Centrifugal and TFF Devices, Ultrafiltration Membranes