Pall Advanta™ Jacketed Housings
Print Product Information
E-Mail
Download PDF
Pall Advanta Jacketed Filter Housings are fabricated with either T-Type or In-Line flow designs and AB style Code 7 fitting configurations for single open-ended (SOE) sanitary AB style filter cartridges. They offer the added feature of a 316L stainless steel jacket for temperature control using hot water or steam, and are suitable for gas service or liquid flows to 20 gal/min (75 L/min) with minimal pressure drops.
Features and Benefits
- Corrosion resistant 316 L Stainless steel jacket for temperature control
- In-Line or T-Type flow designs
- Entire housing electropolished
- Internal surfaces with ≤ 0.4 µm (≤ 15 µin.) Ra surface finish
- External surfaces with ≤ 0.8 µm (≤ 32 µin.) Ra surface finish
- Low hold-up volume — maximizes product recovery
- Easy-draining features, including downward sloping internal contour and low-point drain — allows easy removal of CIP solution or product
- Fewer welds — results in an extremely sanitary design
- Automated orbital welding — produces consistent high quality welds
- Non-rotating vent and drain — prevent twisted hoses and allow hard piping
- Manufactured for use in conformance with cGMP
- 3-A Sanitary Standard Symbol for optimized CIP/cleanable design
- Manufacturing Quality System Certified to ISO 9000 Standards
Materials of Construction
| Housing | 316L Stainless Steel |
| Design Pressure and Temperature | 10 barg at 140 °C (150 psig at 284 °F); Jacket: 4.9 barg at 140 °C (72 psig at 284 °F) |
| Nominal Diameter | 114.5 mm (4 ½ in.) |
| Number of Cartridges | 1 |
| Cartridge Style | AB Code 7 |
| Inlet and Outlet Connections | 1½ in. Sanitary coupling; Jacket: ½ in. NPT |
| Standard Gasket O-ring Material | Ethylene Propylene |
| Legs and Support | ALT: Stand available; ALI: None |
| Closure Style | Vee-band clamp |
| Flow Configuration | ALT: Tee; ALI: In-Line |
Operating Conditions
| Maximum Operating Pressure | -1¹ to 10 barg (-14.5¹ to 150² psig) |
| Maximum Operating Temperature | 150 °C (300 °F) |
² With compatible fluids, which do not soften, swell or adversely affect the gasket materials
