Duo-Fine® GT Series Filter Cartridges

INQUIRE NOW

• Protects Critical Components From Abnormal Wear by Removing Harmful Contaminants
• Extends Lubricant Life Cycles and Lowers Regular Maintenance Costs
• High Surface Area Provides Significantly Higher Contaminant Holding Capacity than Wound or Sock Type Filter Cartridges
• Rigid Pleat Structure Withstands High Differential Pressures During System Start-Up
• Available in Standard Lengths to Retrofit Most Competitive Housings

Performance Specifications

Maximum Differential Pressure: 
100 psid (6.9 bard) @ 68°F (20°C)
50 psid (3.4 bard) @ 150°F (65°C)

Product Specifications

¹ - Provided that the maximum differential pressure is not exceeded based on temperature limits defined above.
² - Registered trademark of DuPont Dow Elastomers.

Typical Flow vs. Differential Pressure for Application Sizing

Flow rate is per 10" (25.4 cm) cartridge. For liquids other than water, multiply differential pressure by fluid viscosity (cP).

Part Numbers/Ordering Information

DFGT  -  U  -   (e.g., DFGT 3-10UN-DOE)

Code	Filter Grades
3	3 µm

Code	Cartridge Lengths (nominal)
10	10"
20	20"
27	27"
30	30"
36	36"
40	40"

Code	Gasket/O-ring Materials
S	Silicone
N	Buna N (standard)
E	Nordel
V	Viton A

Code	End Configurations
DOE	DOE with elastomer gasket seals & end caps
M3	SOE flat closed end, external 222 O-rings (retrofits other manufacturers’ Code 0)3

⁴ - For details, contact Pall Corporation