Hydrogen has long been recognized as clean alternative to fossil fuels. It is inherently a green fuel as it produces no toxic emissions when burned – the only by-product of its combustion is water vapor. Hydrogen can be used in fuel cells for transportation, as a feedstock for refining and chemical processes, and for commercial/residential heat and power. As the shift to renewable energy continues to grow, hydrogen is set to play a key role as a clean energy source and storage medium. It is increasingly featured on countries’ net zero plans – particularly to reduce emissions from highly polluting sectors like heating, steel and long-distance transport.
As a leader in separation and purification technology, Pall Corporation is fully committed to the advancement of the hydrogen economy.
With the experience of hundreds of filtration and separation solutions installed in Hydrogen service across the world and the expertise of lab, field and service experts, Pall understands the needs of customers across the entire Hydrogen value chain. Contact us to find out how Pall can help you to:
Consistently achieve high product purity
Protect critical assets
Reduce size of the production unit
Thank you!
Customer Success Stories:
-
Intermediate product purification
-
Separating electrolyte at low pressure drop
-
Adsorbent bed protection
Helping a blue hydrogen pilot project to purify its feed gas
Challenge
The coal gasification process resulted in char in the post-gasification product that could affect equipment in H2 production process downstream.
Solution
Pall's experts studied the process conditions and offered PSS filter elements, specially made of iron aluminide, that performed well in extreme temperature conditions.
Impact
Pall filters were successfully tested and achieved the required quality
Removing electrolyte from Hydrogen gas with minimal drop in pressure
Challenge
Customer needed to remove liquids from gas with minimal drop in pressure as their technology produced H2 only slightly above atmospheric pressure.
Solution
Pall recommended Liquid-gas coalescer achieved the required separation efficiency while also being fully compatible with the Potassium Hydroxide present in the electrolyte.
Impact
Pall's solution occupied 40% less space than the customer's original separation unit - helping customer reduce capex.
Protecting Pressure Swing Adsorption unit from liquid Contaminants
Challenge
Liquid contamination in the Hydrogen stream was reducing the PSA yield for a French ammonia producer.
Solution
Pall's high efficiency liquid-gas coalescers were installed upstream of the PSA.
Impact
Field measurements confirmed reduction of liquid carry-over, after Pall's solution, to below 2 parts per billion. The customer was able to achieve and maintain high PSA yields.
