Sterile Membrane Filtration

We offer a range of sterile filtration products to meet your industry needs

The Proven Performance of Our Sterile Membrane Filters

Microbial and Particulate-Free Design

Filtration is used to remove particulate and contamination from fluids. Filtering through a 0.2 µm pore size is considered necessary to generate a sterile filtrate. Solutions for filtration can range in volume from just a few milliliters to many liters. Typical fluids may include media with or without serum, buffers, biologic or proteinaceous samples, reagents or other fluids that needs to be free of particulate or microbial contamination.

 

A filter recognized as suitable for producing sterile filtrate is 0.2 µm pore size and capable of passing a bacterial challenge to retain a minimum of 107 cfu/cm² of B. dimunita. It should be noted that some samples may benefit from 0.1 µm pore size filtration, see Mycoplasma Removal, to ensure a sterile filtrate for sensitive cell culture applications. Sterile filtration is used for many applications:

 

  • Media with or without serum to support the growth of cell culture
  • Other reagents or solutions with sensitive components that may degrade when exposed to autoclave temperatures
  • No access to an autoclave
  • Filtering supplements for addition to sterile growth media
  • Filtering samples to prevent microbial growth during storage
  • Filtering buffers to remove particulate and prevent microbial growth during storage
  • Filtering a biologic sample for analytical analysis to protect the expensive instrument from microbial contamination.
  • Filtering environmental samples for analysis
  • Filtering post-fermentation broths for further purification or analysis

 

Although sterile filtration is accepted to be 0.2 µm pore size, our comprehensive, sterile filter product range includes larger pore sizes that may be used on samples that would be harmed if contaminated by microbes during use of a non-sterile device.

 

 

Our Sterile Membrane Filtration Solution 

 

We offer a range of sterile filtration products to meet different volume sizes for applications. Our products range from membranes, syringe filters, vacuum devices to larger capsules.

 

Our AcroPak capsule products range in size from 20 cm2 to 1500 cm2 effective filtration area (EFA). Three membranes choices are available in configurations that scale up to products for pilot and full-scale production. 

 

AcroPak Products with Supor® Membrane - Quickly process difficult-to-filter solutions such as serum, serum supplemented culture media, and viscous or particulate-laden solutions. Supor membrane offers high flow rates and consistently higher total solution throughputs due to higher porosity than most other membranes. It is ideal in situations where rapid filtration or short processing times are essential or where low protein binding is required.

 

Please note: Capsule and syringe filter devices containing HT Tuffryn have been discontinued effective December 31, 2017.

 

Acropak Capsule Filters Brochure

By clicking the submit button below and proceeding I confirm that I have reviewed and agree with the terms of use and privacy policy.

AcroPak™ 400 & 800 Capsules with Fluorodyne® II Membrane

Offer high flow rates, low adsorptive properties, and low extractables. It is ideal for scale-up and down-stream processing applications for biopharmaceutical products. Suitable for applications where customer protocol requires PVDF membrane; double layer sterilizing membrane assures enhanced performance.
Offer high flow rates, low adsorptive properties, and low extractables. It is ideal for scale-up and down-stream processing applications for biopharmaceutical products. Suitable for applications where customer protocol requires PVDF membrane; double layer sterilizing membrane assures enhanced performance.
Read more

Supor® EKV Membrane Filters

0.2 micron rated validated sterilizing-grade membrane filters. Utilizing a laid-over-pleat membrane geometry for high flow rates and throughput performance, they are designed for the most cost effective filtration of a wide range of liquids such as buffers, tissue culture media, and others. A PES membrane ensures very high compatibility over the whole pH range plus very low protein binding to ensure the maximum transmission of active ingredients.
0.2 micron rated validated sterilizing-grade membrane filters. Utilizing a laid-over-pleat membrane geometry for high flow rates and throughput performance, they are designed for the most cost effective filtration of a wide range of liquids such as buffers, tissue culture media, and others. A PES membrane ensures very high compatibility over the whole pH range plus very low protein binding to ensure the maximum transmission of active ingredients.
Read more