Quick and easy filtration to assure the best performance
A filter for HPLC applications is designed to increase accuracy by removing unwanted particles. However, the wrong filter can be a source of contaminants in the form of extractables that elute into the sample from the filter device. These undesired artifacts can jeopardize analytical results. Some extractable concerns include coelution, false quantitation and extraneous peaks.
The specific quality of raw materials, amount of quality control, membrane extraction procedures, and post-treatments all affect the resultant membrane properties and amount of extractable materials. We specifically select the highest grade of materials and performs rigorous extraction methods on our membrane products to hinder the occurrence of undesired artifacts. Choosing membranes that are compatible with your fluids and experimental conditions will reduce/eliminate extractables.
Our HPLC certification ensures that analytical results will not be compromised by extractable filter materials. Our membranes have been tested for compatibility with common HPLC solvents (water, acetonitrile, and methanol) using established HPLC procedures. In addition, to verify low levels of UV-detectable extractables, samples of the entire HPLC Acrodisc syringe filter line are evaluated prior to release.
Pall's Superior Media Separation Technology Ensures:
- Accurate pore size ratings for better chromatography and instrument and column protection.
- Uniform membrane materials (lot-to-lot) for consistent analytical results.
- Low extractable materials for less chromatographic interference.
- Materials of construction selected specifically for analytical analysis with lower extractables and lower API (Active Pharmaceutical Ingredients) adsorption.
Results that are never compromised
The retention efficiency of the Acrodisc PSF filter can directly increase the life of your HPLC column. More retentive filters will also remove smaller non-dissolved particles that may rest on the head of your HPLC column and affect your analytical results as they dissolve during an analysis. The graph in the PDF below demonstrates that the life of an HPLC column can be extended up to 46 times by filter samples prior to injection.
Prefiltration - The GxF Acrodisc PSF syringe filter has a serial glass fiber prefilter to allow for maximum throughput and faster flow rates than standard glass fiber prefilter devices. The multi-layered prefilter traps particulate rated from > 40 to 1 µm.
Automation - Acrodisc PSF syringe filters are designed specifically to meet the exacting requirements of automation systems and to demonstrate critical criteria including smooth filter-to-filter release, consistent turret advancement, exceptional housing strength and a strict outside filter geometry to ensure proper alignment and consistent operation.
Maximized column life
The accurate, reliable, results you can depend on.
Our 0.2 µm Acrodisc® syringe filters are designed to protect the unique packing found in UHPLC columns. Using Pall filters prior to sample analysis prevents column plugging and extends column life. Pall incorporates membranes best suited for UHPLC applications to ensure limited extractables that can produce unexpected peaks. The materials used also reduce binding of API to assure accurate results.
Sample Prep Filtration Products for UHPLC are available in a range of membrane chemistries to provide the best fit for your sample. Membrane types for UHPLC sample prep currently include proprietary PVDF, Nylon and PTFE membranes.
Podcast: Improve Your HPLC Column Performance
Learn about new data from Pall's research on column protection, showing that proper filter selection is critical to maximizing column life.