Poly-Fine® II Series Filter Cartridges
Print Product Information
E-Mail
Download PDF
- Proprietary Filter Media Produced Directly by Pall for Highly Consistent Performance
- High Contaminant Holding Capacity
- Wide Chemical Compatibility
- Rigid Polypropylene Outer Cage Protects Filter
- All Polypropylene One Piece Construction (except 0.2 micron (µm))
- Submicron Prefilter for Final Membrane Application
- Asymmetric Polysulfone Media Used in 0.2 µm Grade
- Fast Rinse-Up to 18 Megohm-cm
Performance Specifications
Filter Grades:0.2, 0.25, 0.45, 0.8, 2, 3, 5, 10, 30, 50, 100 µm
Maximum Forward Differential Pressure:
75 psid (5.1 bard) @ 68°F (20°C)
40 psid (2.8 bard) @ 150°F (65°C)
Recommended Changeout Differential Pressure1:
35 psid (2.4 bard)
FDA Listed Materials:
Manufactured from materials, which are FDA listed for food contact
applications in Title 21 of the U.S. Code of Federal Regulations.
Toxicity:
All polypropylene components meet the specifications for biological safety as per
the USP for Class VI-121°C plastics (gaskets/O-rings excluded).
Cartridge Rinse-Up:
Rinse-up to 18 Megohm-cm with a minimum of throughput.
Purity:
Cartridges are free of resins, binders and adhesives.
Sterilization:
Multiple autoclaving for 30 minutes at 250°F (121°C) under no end load
conditions. In-line steam sterilization is not recommended. May be in-line
sanitized with hot water at 180°F (82°C) for 1 hour.
Product Specifications
Materials of Construction:| Filter Media: | |
| PFT 0.2: | Highly Asymmetric Polysulfone |
| All Others Grades: | Polypropylene |
| Hardware: | Polypropylene |
| Sealing: | Thermal Bond |
| Support Material: | Polypropylene |
| Gaskets/O-rings: |
Silicone Elastomer, Nitrile, EPDM, Fluorocarbon Elastomer, White Nitrile, White Silicone, Expanded PTFE, FEP Encapsulated Silicone, High Purity Fluorocarbon Elastomer, FEP Encapsulated Fluorocarbon Elastomer, Kalrez2, White Neoprene |
Dimensions (nominal):
| Outside Diameter: | 2 3/5" (6.6 cm) |
| Lengths: |
4" (10.2 cm), 9 3/4" (24.8 cm), 10" (25.4 cm), 19 1/2" (49.5 cm), 20" (50.8 cm), 29 1/4" (74.3 cm) 30" (76.2 cm), 39" (99.1 cm), 40" (102 cm) |
|
|
1 Provided that the maximum differential pressure is not exceeded based on temperature limits defined above.
2 Registered trademark of DuPont Dow Elastomers
Particle Retention (µm)
| Cartridge Designation |
Liquid Service (by ASTM F-795 Test) |
Gas Service | |
|---|---|---|---|
| 90% Efficiency |
>99.9% Efficiency |
Removal Efficiency By DOP Test | |
| PFT 0.2 | 0.2 | 0.5 | 99.99% |
| PFT 0.25 | 0.25 | 1.0 | 99.97% |
| PFT 0.45 | 0.45 | 1.2 | 99.93% |
| PFT 0.8 | 0.8 | 2.5 | 99.90% |
| PFT 2.0 | 2.0 | 5.0 | - |
| PFT 3.0 | 3.0 | 7.0 | - |
| PFT 5.0 | 5.0 | 12.0 | - |
| PFT 10.0 | 10.0 | 15.0 | - |
| PFT 30.0 | 30.0 | 40.0 | - |
| PFT 50.0 | 50.0 | 65.0 | - |
| PFT 100.0 | 85.0 | 100.0 | - |
Typical Flow vs. Differential Pressure for Application Sizing
Flow rate is per 10" (25.4 cm) cartridge. For liquids other than water, multiply differential pressure by fluid viscosity (cP).
| PFT |  |
- |  |
U |  |
- |  |
  -  |
(e.g., PFT 0.2-10US-M3B414-BLK) |
| Code |
Filter Grades |
|---|---|
| 0.2 | 0.2 µm |
| 0.25 | 0.25 µm |
| 0.45 | 0.45 µm |
| 0.8 | 0.8 µm |
| 2 | 2 µm |
| 3 | 3 µm |
| 5 | 5 µm |
| 10 | 10 µm |
| 30 | 30 µm |
| 50 | 50 µm |
| 100 | 100 µm |
| Code |
Cartridge Lengths (nominal) |
|---|---|
| 4 | 4" |
| 9.75 | 9.75" |
| 10 | 10" |
| 19.5 | 19.5" |
| 20 | 20" |
| 29.25 | 29.25" |
| 30 | 30" |
| 39 | 39" |
| 40 | 40" |
| Code |
Gasket/O-ring Materials |
|---|---|
| S | Silicone (standard O-rings) |
| N | Nitrile (standard gaskets) |
| M | White Silicone |
| W | White Nitrile (gaskets) |
| V | Fluorocarbon Elastomer |
| E | EPDM |
| T | FEP Encapsulated Silicone (O-rings) |
| T | Expanded PTFE (gaskets) |
| X | No O-ring required (M2 style only) |
| F | FEP Encapsulated Fluorocarbon Elastomer (O-rings) |
| K | Kalrez (222 O-rings) |
| Q | High Purity Fluorocarbon Elastomer (222 O-rings) |
| Z | White Neoprene (gaskets) |
| Code |
End Configurations |
|---|---|
| Blank | DOE industrial |
| 1X | DOE industrial, 1" (2.54 cm) extended core |
| M2 | SOE flat closed end, fits housings with 020 O-ring post |
| M3 | SOE flat closed end, external 222 O-rings (retrofits other manufacturers' Code 0)3 |
| M3H | SOE large diameter closed end, external 222 O-rings |
| M4 | SOE fin end, external 222 O-rings with locking tabs |
| M5 | DOE, internal 120 O-rings (retrofits 213 O-ring style)3 |
| M6 | SOE flat closed end, external 226 O-rings (retrofits other manufacturers' Code 6)3 |
| M7 | SOE fin end, external 226 O-rings (retrofits other manufacturers' Code 7)3 |
| M8 | SOE fin end, external 222 O-rings (retrofits other manufacturers' Code 5)3 |
| M10 | DOE, internal O-rings (fits other manufacturers' housings)3 |
| M11 | SOE flat closed end, internal 120 O-rings (retrofits other manufacturers' X style)3 |
| M18 | SOE flat closed end, external 222 O-rings |
| M20 | SOE, internal O-rings (same as M10), closed end with deep recess |
| M22 | SOE fin end, external 225 O-ring |
Code
Bubble Test Option
Blank
No Bubble Test
B
100% Bubble Test
Code
Pre-Rinse Option
Blank
No Pre-Rinse
414
100% Pre-Rinse
Code
Packaging
Blank
Standard Packaging
-BLK
Bulk Packaging