Claris® Series Filter Cartridges

INQUIRE NOW

High Consistency Polypropylene
Melt Blown Cartridge

• Graded pore structure enhances dirt-holding capacity
• E-core, an Extruded Fibrous Core, provides excellent strength
• Unique proprietary process
• Easy and safe cartridge incineration and disposal
• All polypropylene construction
• No surfactants, binders, or adhesives
• NSF certified
• Plastic and metal spring assembly end configurations are available

Performance Specifications

Filter grades

• 1, 3, 5, 10, 20, 30, 50, 75 micron (μm)

Maximum differential pressure

• 3.45 bard (50 psid) @ 20 °C (68 °F)
• 1.72 bard (25 psid) @ 60 °C (140 °F)

Recommended change-out differential pressure¹

• 2.4 bard (35 psid)

Food and Water Contact Use

• Please contact Pall Corporation to verify that the product conforms to your national legislation and/or regional regulatory requirements for water and food contact use.

Purity

• Cartridges do not use surfactants, anti-static agents, binders, and adhesives.

Product Specifications

Materials of construction

Dimensions (nominal)

¹ Provided that the maximum differential pressure is not exceeded based on temperature limits defined above.
² These components are not NSF certified.
³ Trademark of Exxon Mobil Corporation.

Typical Flow vs. Differential Pressure for Application Sizing

Unit conversion: 1 bar = 100 kPa

Flow rate is for a 25.4 cm (10 in) cartridge. For liquids other than water, multiply differential pressure by fluid viscosity (cP).

Table 1

Table 2

Table 3

Table 4

⁴ Based on typical application usage.
⁵ For details, contact Pall Corporation.