DFT Classic® Series Filter Cartridges

Reliable, Consistent Filtration
Performance From Each Cartridge

• Graded pore structure for efficient removal of a wide range of particle sizes
• Cost savings from long service filter life
• Diverse range of removal ratings
• Wide chemical compatibility
• Suitable for liquid and gas filtration
• High contaminant-holding capacity
• Cartridges fit into most standard housings
• Various cartridge sealing options
• Numerous cartridge configurations
• Manufactured under ISO 9001 quality system

• Chemicals: polishing of chemical solutions, bulk industrial chemicals, solvents, acids, bases,monomers, process and cooling water
• MagneticCoatings: audio, video & computer tape, floppy discs, computer hard discs, solvents
• Photographic: photo emulsions, chemicals, wash & rinse water
• Food & Beverage: edible oils, spice oils
• Oil Production: well completion fluids, water flood
• Air & Gas: compressed air, instrument air, most gases including nitrogen, hydrogen, helium, freon, most corrosive gases
• Other: solution mining, deep well disposal, paint, ink & coatings, lubricating oils, electropolishing solutions, plating solutions, pigments & dyes, cleaning fluids, adhesives.

Materials of Construction

FilterMedia:

• Bleached FDA-listed cotton, standard cotton, natural cotton, glass fiber, heat purified glass fiber, FDA-listed polypropylene, standard polypropylene, rayon, polyester, nylon, acrylic, polyphenylene sulfide (PPS).

Center Core:

• Polypropylene, Electrolytic Tin Plated steel (ETP), 304 stainless steel, 316 stainless steel.

Core Cover Option:

• Used to control fiber migration; compatible with existing fiber. Materials include polypropylene, nylon, fiberglass, and polyester.

End Treatment Option:

• Additional fiber migration control; compatible with existing fiber material.

Dimensions (nominal):

• Outside Diameter: 2 in. (5.1 cm), 2 ³⁄₈ in. (6.0 cm), 2 ¹⁄₂ in. (6.4 cm), 2 ⁵⁄₈ in. (6.7 cm) optional
• Inside Diameter: 1 in. (2.5 cm)
• Lengths¹: 9 ³⁄₄ in. (24.8 cm), 10 in. (25.4 cm), 19 ¹⁄₂ in. (49.5 cm), 20 in. (50.8 cm), 29 ¹⁄₂ in. (74.9 cm), 30 in. (76.2 cm), 39 in. (99.1 cm), 39 ¹⁄₂ in. (100.3 cm), 40 in. (102 cm), 49 ¹⁄₂ in. (125.7 cm), 50 in. (127 cm)

¹ For additional length requirements, consult your Pall representative.

Filter Grades:

• 0.5, 1, 2, 3, 5, 7, 10, 15, 20, 25, 30, 40, 50, 75, 100, 150, 200, 250, 300, 350 μm

Maximum Temperature Rating:

• See Material Selection Guide (Additional Information tab)

Material Selection Guide

Filter Medium	Premium Cotton2	Premium Polypropylene2	Rayon	Polyester
Maximum Temperature
with metal core	300°F (149°C)	200°F (93°C)	300°F (149°C)	250°F (121°C)
with polypropylene core	140°F (60°C)	140°F (60°C)	140°F (60°C)	140°F (60°C)
Compatibility with:
Potable Liquids, Water	Excellent	Excellent	Good	Good
Organic Solvents	Excellent	Good	Excellent	Excellent
Oils	Excellent	Fair	Excellent	Good
Organic Acids	Good	Excellent	Good	Good
Alkalies	Good	Excellent	Good	N/R
Oxidizing Agents	Fair	Poor	Fair	Good
Steam, Non-Continuous	N/R	Fair	N/R	Fair
Strong Inorganic Acids	N/R	Excellent	Poor	Fair
Dilute Inorganic Acids	Fair	Excellent	Fair	Good
Microorganism Resistance	Poor	Excellent	Poor	Excellent

Filter Medium	Glass Fiber	PPS	Nylon	Acrylic
Maximum Temperature
with metal core	750°F (399°C)	375°F (191°C)	250°F (121°C)	200°F (93°C)
with polypropylene core	140°F (60°C)	140°F (60°C)	140°F (60°C)	140°F (60°C)
Compatibility with:
Potable Liquids, Water	Poor	Excellent	Poor	Good
Organic Solvents	Excellent	Excellent	Excellent	Good
Oils	Excellent	Excellent	Excellent	Good
Organic Acids	Excellent	Excellent	Fair	Good
Alkalies	Poor	Excellent	Excellent	Fair
Oxidizing Agents	Excellent	Poor	Fair	Good
Steam, Non-Continuous	N/R	Fair	Fair	Poor
Strong Inorganic Acids	Excellent	Excellent	N/R	Good
Dilute Inorganic Acids	Excellent	Excellent	Poor	Excellent
Microorganism Resistance	Excellent	Excellent	Excellent	Excellent

N/R = Not Recommended

² Please contact Pall Corporation to verify that the product conforms to your national legislation and/or regional regulatory requirements for water and food contact use.

[Code 1][Code 2][Code 3][Code 4][Code 5][Code 6][Code 7][Code 8][Code 9]–[Code 10]–[Code 11]

(e.g., G C010AW30SCE–EC1S–1PK)

Code 1	Type of Service
Blank	Liquid
G	Gas/Air

Code 2	FilterMedium
C	Bleached FDA-listed Cotton
E	Polyester
F	Glass Fiber
G	Heat Purified Glass Fiber
U	FDA-listed Polypropylene
P	Standard Polypropylene
RT	PPS
N	Nylon
O	Acrylic
R	Rayon
NC	Natural Cotton
SC	Standard Cotton

Code 3	Filter Grades
0.5	0.5 μm
001	1 μm
002	2 μm
003	3 μm
005	5 μm
007	7 μm
010	10 μm
015	15 μm
020	20 μm
025	25 μm
030	30 μm
040	40 μm
050	50 μm
075	75 μm
100	100 μm
150	150 μm
200	200 μm
250	250 μm
300	300 μm
350	350 μm

Code 4	OutsideDiameter (nominal)
A	2 1⁄2 in. (standard)
B	2 5⁄8 in.
D	2 in.
R	2 3⁄8 in.

Code 5	Integrally Wound
Blank	For under 10 in.
W	All cartridges over 10 in. are integrally wound

Code 6	Cartridge Lengths (nominal)
9.75	9 3⁄4 in.
10	10 in.
19.5	19 1⁄2 in.
20	20 in.
29.5	29 1⁄2 in.
30	30 in.
39	39 in.
39.5	39 1⁄2 in.
40	40 in.
49.5	49 1⁄2 in.
50	50 in.

Code 7	Core Material
A	304 Stainless Steel
S	316 Stainless Steel
T	Electrolytic Tin Plated Steel (ETP)
U	Polypropylene

Code 8	Core Cover
Blank	None
C	Compatible with and equal to resistance of filter medium

Code 9	End Treatment
Blank	None
E	Compatible with and equal to resistance of filter medium

Code 10	Extended Core
Blank	None
EC1A	304 Stainless Steel
EC1S	316 Stainless Steel
EC1T	Electrolytic Tin Plated Steel (ETP)
EC1U	Polypropylene

Code 11	Packaging
Blank	Bulk
1PK	Individually Wrapped