UltiKleen™-S Filter and UltiKleen-G2
Print Product Information
E-Mail
Download PDF
Pall’s UltiKleen-S filter is an advanced all-fluoropolymer cartridge that is highly recommended for critical chemical filtration. We guarantee extractable levels and particle cleanliness levels for this filter.
- Guaranteed extractable levels (< 25 ppb total in a 5% HCl extraction of 1.5 liters for 24 hours.)
- Guaranteed out of package particle cleanliness (<10 particles / mL >0.1 µm) based on ultra-high-purity DI Water
- Product is provided prewet as a standard
- Excellent compatibility
- All fluoropolymer construction
- Three removal ratings available
- Optimized crescent shaped Ultipleat
®
filter design - Very high flow rates
- Low differential pressure
- Manufactured in a cleanroom environment
- 100% integrity tested
Materials
- Medium: PTFE
- Core, cage, and end caps: High purity PFA
- Support and drainage: PTFE
- Sealing methods: Melt seal patented process
- O-ring options: Teflon1 encapsulated Viton1, Kalrez1, and Chemraz2
Removal Ratings
- 0.2 μm, 0.1 μm, 0.05 μm
Filter Areas
ABF- 127 mm / 5 in.: 0.55 m2 / 5.92 ft2
- 254 mm / 10 in.: 1.1 m2 / 11.84 ft2
- 508 mm / 20 in.: 2.2 m2 / 23.5 ft2
- 762 mm / 30 in.: 3.3 m2 / 35.5 ft2
- 254 mm / 10 in.: 2.2 m2 / 23.7 ft2
- 508 mm / 20 in.: 4.4 m2 / 47.4 ft2
- 762 mm / 30 in.: 6.6 m2 / 71.0 ft2
Configurations
- Nominal length:
- 127 mm / 5 in.
- 254 mm / 10 in.
- 508 mm / 20 in.
- 762 mm / 30 in.
- Diameter:
- ABF: 70 mm / 2.75 in.
- ABFG: 83 mm / 3.27 in.
- O-ring size/end caps:
- Code 3: 222 double O-ring / flat end
- MR Code 25: 222 double O-ring / flat end designed to retrofit code 0 elements
Operating Conditions
- Maximum operating temperature: 170°C / 338°F
- Maximum forward differential pressure:
- 0.69 MPa @ 50 °C / 100 psid @ 120 °F
- 0.41 MPa @ 51 – 110 °C / 60 psid @ 121 – 230 °F
- 0.24 MPa @ 111 – 170 °C / 35 psid @ 231 – 335 °F
- Maximum reverse differential pressure: 0.34 MPa @ 20 °C / 50 psid @ 68 °F
Integrity Test Values3 (UltiKleen-S Filter)
Per 254 mm / 10 in segment- 0.05 μm: < 26 mL / min @ 0.12 MPa / 17.5 psig
- 0.10 μm: < 39 mL / min @ 0.117 MPa / 17 psig
- 0.20 μm: < 34 mL / min @ 0.084 MPa / 12.2 psig
1 Viton, Teflon and Kalrez are registered trademarks of E. I. du Pont de Nemours and Company
2 Chemraz is a registered trademark of Greene Tweed and Co.
3 Test fluid used is 60/40, IPA:H2O
Pressure Drop vs. Liquid Flow Rate4
4 For liquids with a viscosity differing from water, multiply the pressure drop by the viscosity in centipoise.
| Part Number | Removal Rating (μm) | Nominal Length5 |
Configuration Code | O-Ring Material6 |
| ABF04UKFR3EH1K3 | 0.2 | 127 / 5 | 3 | |
| ABF1UKFR3EH1K3 | 0.2 | 254 / 10 | 3 | Teflon encapsulated Viton |
| MRF1UKFR25EH1K3 | 0.2 | 254 / 10 | 25 | Teflon encapsulated Viton |
| ABF04UKFT3EH1K3 | 0.1 | 127 / 5 | 3 | Teflon encapsulated Viton |
| ABF1UKFT3EH1K3 | 0.1 | 254 / 10 | 3 | Teflon encapsulated Viton |
| ABF1UKFT3EH11K3 | 0.1 | 254 / 10 | 3 | Kalrez |
| ABF1UKFT3EH12K3 | 0.1 | 254 / 10 | 3 | Chemraz |
| MRF1UKFT25EH1K3 | 0.1 | 254 / 10 | 25 | Teflon encapsulated Viton |
| ABF04UKFD3EH1K3 | 0.05 | 127 / 5 | 3 | Teflon encapsulated Viton |
| ABF1UKFD3EH1K3 | 0.05 | 254 / 10 | 3 | Teflon encapsulated Viton |
| ABF1UKFD3EH11K3 | 0.05 | 254 / 10 | 3 | Kalrez |
| ABF1UKFD3EH12K3 | 0.05 | 254 / 10 | 3 | Chemraz |
| MRF1UKFD25EH1K3 | 0.05 | 254 / 10 | 25 | Teflon encapsulated Viton |
| ABFG1UCFRL3EH1K37 | 0.2 | 225 / 10 | 3 | Teflon encapsulated Viton |
| ABFG1UCFTL3EH1K37 | 0.1 | 225 / 10 | 3 | Teflon encapsulated Viton |
| ABFG1UCFDL3EH1K37 | 0.05 | 225 / 10 | 3 | Teflon encapsulated Viton |