Emflon® Filter (Chemical Filtration)
Print Product Information
E-Mail
Download PDF
The Emflon filter is recommended for chemicals which are compatible with PTFE and polypropylene.
- Wide range of configurations
- Five removal ratings
- High flow rates
- Integrity testable
- Low extractables
- Optimized design
- Manufactured in a cleanroom environment
- 100% integrity tested
Materials
- Medium: PTFE
- Core, cage, and end caps: Polypropylene
- Support and drainage: Polypropylene
- O-ring options: Viton1 and Teflon encapsulated Viton
Removal Ratings
- 5.0 μm, 1.0 μm, 0.2 μm, 0.1 μm, 0.05 μm
Filter Areas
- 10 in. / 254 mm: 9.45 ft2 / 0.88 m2
- 20 in. / 508 mm: 18.90 ft2 / 1.76 m2
- 30 in. / 762 mm: 28.35 ft2 / 2.64 m2
- 40 in. / 1016 mm: 37.80 ft2 / 3.52 m2
Configurations
- Nominal length: 10 in. / 254 mm, 20 in. / 508 mm, 30 in. / 762 mm, and 40 in. / 1016 mm
- Diameter: 2.75 in. / 70 mm
- O-ring size / end caps:
- Code 3 (222 double O-ring / flat end)
- Code 8 (222 double O-ring / finned end)
- Code 7 (226 double O-ring bayonet lock / finned end)
Operating Conditions
- Maximum Operating Temperature: 194°F / 90°C
- Maximum Forward Differential Pressure:
- 80 psid @ 120°F / 5.5 bar @ 50°C;
- 50 psid @ 121° - 195°F / 3.5 bar @ 51°- 90°C
Integrity Test Values2
Per 10 in. / 254 mm segment- 0.05 μm: < 45 mL / min @ 35 psig / 2.4 bar
- 0.1 μm: < 64 mL / min @ 19 psig / 1.3 bar
- 0.2 μm: < 32 mL / min @ 11 psig / 0.76 bar
1 Viton and Teflon are trademarks of DuPont Dow Elastomers
2 Test fluid used is 60:40, IPA:H2O.
Pressure Drop vs. Liquid Flow Rate3
3 For liquids with viscosity differing from water, multiply the pressure drop by the viscosity in centipoise.
| Part Number4 | Removal Rating (μm) | Nominal Length (in. / mm) |
Configuration Code | O-Ring Material5 |
| AB1FC8EJ | 5.0 | 10 / 254 | 8 | Ethylene Propylene |
| AB1FN3EH1 | 1.0 | 10 / 254 | 3 | |
| AB1FN3EHF | 1.0 | 10 / 254 | 3 | Viton A |
| AB1FR3EH1 | 0.2 | 10 / 254 | 3 | Teflon Encapsulated Viton |
| AB1FR3EHF | 0.2 | 10 / 254 | 3 | Viton A |
| AB1FR7EH1 | 0.2 | 10 / 254 | 7 | Teflon Encapsulated Viton |
| AB1FR8EH1 | 0.2 | 10 / 254 | 8 | Teflon Encapsulated Viton |
| AB1FR8EHF | 0.2 | 10 / 254 | 8 | Viton A |
| AB2FR3EH1 | 0.2 | 20 / 508 | 3 | Teflon Encapsulated Viton |
| AB2FR3EHF | 0.2 | 20 / 508 | 3 | Viton A |
| AB2FR8EHF | 0.2 | 20 / 508 | 8 | Viton A |
| AB3FR3EH1 | 0.2 | 30 / 762 | 3 | Teflon Encapsulated Viton |
| AB1FT3EH1 | 0.1 | 10 / 254 | 3 | Teflon Encapsulated Viton |
| AB1FT3EHF | 0.1 | 10 / 254 | 3 | Viton A |
| AB2FT3EH1 | 0.1 | 20 / 508 | 3 | Teflon Encapsulated Viton |
| AB3FT3EH1 | 0.1 | 30 / 762 | 3 | Teflon Encapsulated Viton |
| AB1FD8EH1 | 0.05 | 10 / 254 | 8 | Teflon Encapsulated Viton |
| AB2FD3EH1 | 0.05 | 20 / 508 | 3 | Teflon Encapsulated Viton |
| AB3FD3EH1 | 0.05 | 30 / 762 | 3 | Teflon Encapsulated Viton |
4 For prewet option add -K3 to end of part number.
5 Other O-ring materials are available.
Unit conversion: 1 bar = 100 kilopascals