Profile® UP Filter

This Profile UP filter consists of a pleated, depth medium using the Ultipleat® filter geometry. The result is a resin trap, pre-RO or cooling water filter with superior flow vs. differential pressure capabilities.

• All polypropylene construction
• High particle removal efficiency
• Long service life
• Fixed pore structure
• Low extractables
• No surfactants or binder resins used during manufacture
• Available in many removal ratings
• Available in an RF configuration so the cartridge may fit into a housing designed to hold either a 64 mm or 70 mm / 2.5 in. or 2.75 in. O.D. filter
• Very low clean pressure drop

Materials

• Medium: Polypropylene
• Core, cage, end caps: Polypropylene
• Gasket: Polyethylene
• O-ring: Silicone

Removal Ratings

• 3.2 μm, 4.5 μm, 6 μm, 10 μm, 20 μm, 30 μm, 40 μm, 50 μm, 70 μm, 100 μm

Configurations

• RF style filter available as a 254 mm / 10 in., 508 mm / 20 in., 762 mm / 30 in., or 1016 mm / 40 in. long filter cartridge
• Diameter: 64 mm / 2.5 in.
• Double open end, flat gasket welded to each end
• AB style Code 3, 7 and 8 available as 254 mm / 10 in., 508 mm / 20 in., 762 mm / 30 in., or 1016 mm / 40 in. long filters

Operating Characteristics

• Maximum Differential Pressure:
  • 0.41 MPa @ 30°C / 60 psid @ 86°F;
  • 0.34 MPa @ 50°C / 50 psid @ 122°F;
  • 0.21 MPa @ 70°C / 30 psid @ 158°F;
  • 0.1 MPa @ 80°C / 15 psid @ 176°F

Removal Rating/Pressure Drop

Cartridge Grade	Removal Rating in Microns (μm) at % Efficiency1		Clean Pressure Drop in Water Per 254 mm / 10 in. Element
	90%	99.98%	kPa / 10 L / min	psi / gpm
UY020	< 1	3.2	2.37	0.13
UY045	1.2	4.5	1.55	0.085
UY060	2.5	6	0.64	0.035
UY100	4.3	10	0.55	0.030
UY200	10.5	20	0.46	0.025
UY300	16.5	30	0.36	0.020
UY400	19	40	0.27	0.015
UY500	25	50	0.18	≤ 0.010
UY700	35	— 2	0.18	≤ 0.010
UY1000	60	— 2	0.18	≤ 0.010

Part Number	Removal Rating (μm)	Nominal Length3 (mm / in.)	Configuration3 Code	O-Ring/Gasket Material3
AB1UY0203H4	3.2	254 / 10	3	Silicone
R1FUY020J8	3.2	254 / 10	Double Open End / Flat Gasket	Polyethylene
AB1UY0453H4	4.5	254 / 10	3	Silicone
R1FUY045J8	4.5	254 / 10	Double Open End / Flat Gasket	Polyethylene
AB1UY0603H4	6	254 / 10	3	Silicone
R1FUY060J8	6	254 / 10	Double Open End / Flat Gasket	Polyethylene
AB1UY1003H4	10	254 / 10	3	Silicone
R1FUY100J8	10	254 / 10	Double Open End / Flat Gasket	Polyethylene
AB1UY2003H4	20	254 / 10	3	Silicone
AB1UY4003H4	40	254 / 10	3	Silicone
R1FUY400J8	40	254 / 10	Double Open End / Flat Gasket	Polyethylene
AB1UY10003H4	100	254 / 10	3	Silicone

¹ Rating of filter is based upon the modified Oklahoma State University (OSU) F-2 Filter Performance (Beta Rating) Test.
² Precision evaluation of the 99.98% removal efficiency for these coarse grades is not possible with the OSU test procedure utilized.
³ Other lengths, configurations and gasket materials are available.

Unit conversion: 1 bar = 100 kilopascals