curve imageHomeProductsContact UsSearch
wat_nav_waterMarket/ApplicationsProductsArticles/StudiesSupportEvents
 Please scroll down to find navigation that would normally be here if JavaScript were enabled!

Pall Aria AP™ Water Treatment Systems
  Pall Aria AP™ Water Treatment Systems
A Packaged, Pre-Engineered Solution for Communities and Industries

Pall Aria AP membrane water treatment systems are designed to meet the needs of communities and industries for pure drinking and process water.

The fully-automated systems use tough hollow-fiber filtration modules to remove particles and microorganisms greater than the cutoff of the membrane, from any water source.

Typical flows range from 150 gpm to 3 MGD (800 - 12,000 m3/day) with multiple systems. The maximum single unit capacity is 1 MGD (± 4,000 m3/day).

Meet stringent regulatory standards today and in the future.
  Full System NSF 61 listing and ETV certified for surface water treatment rule
  ISO 9001 registration from Lloyd’s Register of Quality Assurance Limited
  NSF International Drinking Water Systems Center independent performance testing:
     arsenic reduced to undetectable levels (below 2 ppb)
  Certified in France (French Health Ministry), Germany (Hygiene-Institut), United Kingdom
     (Drinking Water Inspectorate) and in many other countries in Europe

Reduce your labor and operations costs.
  Quick, cost-effective installation
  Fully automated functions, including cleaning operations and integrity-test
  Fastest membrane repair in the industry

Pall Aria™ AP Systems are Available in English and Metric Versions

                          English Version                                        Metric Version
Model
Number
  Maximum
Number of
Modules
Maximum
Filtered
Water
Capacity
(gpm)
Dimensions
(ft)
  Maximum
Number of
Modules
Maximum
Filtered
Water
Capacity
(m3/h)
Dimensions
(mm)
AP-1   2 25 6 x 2.8 x 9.81   4 10 1600 x 2100 x 3100
AP-2   8 50 8 x 4.1 x 9.91   10 40 1850 x 3600 x 3200
AP-3   10 200 9.5 x 6.9 x 10.31   20 55 2250 x 4200 x 3200
AP-3x   20 200 8.8 x 18.6 x 10.82   Not Available Not Available Not Available
AP-4   36 350 10.8 x 20.8 x 10.82   30 90 4600 x 5100 x 3300
AP-6   60 700 19.1 x 17 x 10.82,3   60 170 5700 x 5700 x 33004



1
Module rack is off the skid.
2 Control skid w/attached module rack.
3 Two freestanding tanks 5'6" wide x 7' 6" high, shipped separately for each skid.
4 Size for 40 module unit.


Available Literature
Pall Aria Systems for Water Treatment Applications Guide 
Pall Aria AP-Series Water Treatment System 
Case study: Crested Butte, CO 
Case study: Lakeview Utility District, TN 
Case study: Village of Groton, NY 

Standard equipment
  Tough hollow-fiber membrane modules [microfiltration (MF) and ultrafiltration (UF)]
  316 SST pumps with TEFC Motors and VFDs
  Backwash tank and pump
  Manual and automatic valves
  Flow meter, pressure and temperature sensors
  Control panel
  NEMA-4 electrical enclosures
  PLC control
  Painted carbon steel frame

Optional equipment
  Laser turbidimeter
  Particle counter
  Air compressor system
  Auxiliary skids for compressed air and chemical feed/ preoxidation
  Enhanced flux maintenance (EFM) system
  Disinfectant dosing system
  Oxidation equipment (iron and manganese removal)
  Coagulant dosing equipment (TOC, arsenic, and other applications)
  PC for operator interface and data acquisition
  Remote access
  Auto-alarm dialer

(Top)