Equipment, Pumps, Manifolds & Spare Parts

Maximize Workspace and Minimize Contamination Risk

• Compact design – Small footprint frees valuable benchtop space and provides flexibility in arranging workspace for optimal efficiency and workflow.
• Minimal height – Allows convenient use in a hood fitted with a sash that can limit upward range of motion during routine analysis.
• Disposable fluid path – Simple to load and completely disposable to eliminate potential biofilm build-up. There is no need to clean, wrap, and autoclave a bulky multi-place manifold. The potential for sporadic and unnecessary contamination is removed.
• Peristaltic flow design – Pulls sample through the filter and fluid path eliminating the need for a vacuum source. Also ensures the fluid flows in one direction without the potential for back-up and contamination of analysis.

2 Part numbers available

Simple design, reliable dispense

• Easy to load — Simple loading and unloading of refill pack at any point during use.
• No jamming — Guide plates assist loading and keep refill web in alignment during use to avoid jamming of the instrument.
• Soft touch keypad — Aseptically dispense a disc of membrane at the touch of a button.
• Designed to hold 200 membrane discs — Saves time by eliminating interruptions to reload dispenser.

10 Part numbers available

Easy to use, disposable funnels for microbiological monitoring of aqueous solutions

• Easy Placement - The Sentino Filter Funnel and Adapter are designed with a press-fit seal, membrane guides and forceps access point allowing for simple set up and membrane removal. This will speed up the process time in the laboratory.
• Risk Reduction - The Sentino Filter Funnel and Pall Membranes reduce the risk of a contamination event as compared to reusable funnels. The filter funnels are gamma irradiated eliminating the need for autoclaving or any other cleaning/sanitizing techniques. This will save time and money by eliminating the need to investigate contamination events resulting from the reusable devices.
• Regulatory Compliance - Membrane filtration is the method of choice for microbial monitoring of aqueous solutions as specified in "Standard Methods for the Examination of Water and Wastewater" and Pharmacopoeias worldwide.
• Easy and accurate sample measurement

6 Part numbers available

Unique Magnetic Seal Allows Easy,

One-Handed Vacuum Filtration of Liquids

• No-leak magnetic seal allows one-hand operation.  
• Polyphenylsulfone construction is compatible with anti-foaming agents and many other solvents.
• Convenient.  150 mL size allows for easy fit into small autoclaves and 500 mL size is ideal for filtration of large samples.

12 Part numbers available

Designed for Use with the New Sentino Microbiology Pump

• Variety of sizes - Available in 150, 300, and 500 mL. Convenient 150 mL size easily fits into small autoclaves; 500 mL size is ideal for large sample filtration.
• Easy to use - No-leak magnetic seal allows one-handed operation.
• Safe to use - Sturdy, polyphenylsulfone plastic construction is shatterproof and offers broad range of chemical compatibility.
• Simple placement - Membrane guides help center filter on platform.

12 Part numbers available

Protects Valves and Pump Components from Damage Due to Liquids

• Incorporates a hydrophobic PTFE membrane
• Allows air and gases to pass through freely while blocking aqueous solutions and aerosol contaminants
• Offers highly effective retention of bacteria with minimal restriction of pump performance

1 Part number available

One-Handed Dispensing ofCellulose Absorbent Pads

• Enables user to dispense a clean cellulose pad into a Petri dish whenever needed without touching the pad.
• Handy dispenser kit holds 1 tube of 100 absorbent pads (10 tubes included). Each tube drops quickly into the hand dispenser for easy use.
• Available non-sterile or gammairradiated. No EtO residuals to impede microbial growth.

2 Part numbers available

Cost-Effective, Reliable Pumps Now Smaller and Lighter Weight

• Reduces the risk of sample contamination. An air seal between the pump and cylinder provides oil- and dust-free vacuum/pressure delivery.
• Compact design saves laboratory space.
• Features a diaphragm for cleaner, quieter operation.

2 Part numbers available

Economical, Autoclavable Funnels for Vacuum Filtration

• Transparent funnels with graduations permit easy visual measurement.
• Less expensive than stainless steel and more durable than glass.
• Tapered stem fits standard size #2 stoppers.
• Available in 50 and 200 mL capacities.

4 Part numbers available

Lightweight Filter Holder for Particulate Sampling

• Domed inlet provides uniform sample distribution on the filter.
• Delrin plastic offers broad chemical compatibility and material strength.
• Accepts 25 mm filter discs.
• Lightweight for venting and air monitoring applications.

1 Part number available

Ultimate Chemical Resistance and Easy Assembly

• Quick, easy assembly. Funnel’s weight seals filter to base.   
• 100 mL capacity with 50 mL calibration facilitates easy measurement.
• Stainless steel construction offers excellent chemical resistance.

2 Part numbers available

Lightweight, Anodized Aluminum Filter Holder

• Convenient design allows opening and closing without disrupting membrane.

5 Part numbers available

Sturdy, Lightweight Unit for Monitoring Particulate in Gases or Liquids

• Lightweight plastic construction.
• Luer-Lok* vent plug facilitates removal of air bubbles in liquid filtration.

5 Part numbers available

One-liter Funnel with ExcellentChemical Compatibility

• Bayonet twist-lock seal provides reliable sealing without an O-ring.
• Stainless steel construction offers excellent chemical resistance. 

2 Part numbers available

Excellent for Use In High Throughput Sample Prep Applications

Discontinuation Notice

1 Part number available

A unique microbiology manifold that allows you to optimize testing without sacrificing cleanliness. With interchangeable components and coupling devices, the manifold takes direction from you.

8 Part numbers available

Lightweight, Corrosion-Resistant Filter Holders for Routine Air Sampling 25 mm holder is autoclavable.

• Can be used for bacterial monitoring and particulate analysis.
• 37 and 47 mm holders include a plastic cap that protects samples after filtration.

2 Part numbers available