The Pall Advanta range of filter housings has been specifically designed and engineered for today’s manufacturing processes. These advanced housings are manufactured from 316L stainless steel and are engineered to meet the requirements of the BioPharmaceutical industry. State-of-the-art manufacturing technologies are used to construct a housing ideal for the most critical of applications.
Fine filtration of liquids is a key part of many production processes. These Pall Advanta housings have been specifically designed to meet the many requirements of this demanding application. During the design process critical features were optimized to ensure trouble-free use and low installation and maintenance costs. Areas such as surface finish, suitability for CIP and SIP, integrity testing and incorporation into automated production processes are included.
Features
- Aseptic design
- Crevice-free electropolished surfaces with an internal Ra value of < 0.4 µm (< 15 µin.)
- Fully self draining
- No dead legs
- Low hold-up volumes for maximum product recovery
- Quick fit Stäubli*-type connections for easy filter integrity testing
- Easy to use low point sanitary drain valve
- Range of options to aid use in automated production systems
- CE marking shows design review to European Pressure Directive 97/9/EC
- Every housing supplied with a quality certificate and manufactured to ATEX Directive 94/9/EC (Group ll Category 2)
- Variety of connection styles, vents and drains offer choice and convenience
- Filter cartridge accepts single open-ended Pall Code 7 and Code 2 AB style 5 in. (127 mm), 10 in. (254 mm), 20 in. (508 mm), and 30 in. (762 mm) height filter cartridges
*Stäubli is a trademark of Stäubli AG.
Materials of Construction
- Wetted Parts: AISI 316L stainless steel
- Clamp: AISI Nitronic1 60
- O-ring: Silicone — FDA-listed
- Steam-sterilizable: Up to 150 °C (300 °F)
- Surface Finish: All electropolished
Internal: Ra < 0.4 µm (< 15 µin.) (typical)
External: Ra < 0.8 µm (< 32 µin.) (typical)
Inspection Documentation
- Test report type 2.3 to EN10204 Conformance to EC PED2
Operating Conditions
- Maximum Operating Pressure: -1 to 10 barg (-14.5)3 to 1502psig)
- Maximum Operating Temperature:150 °C (300 °F)
Nominal Dimensions
|
| ALT105G23CBH4 |
190 mm (7.4 in.) |
378 mm (14.8 in.) |
160 mm (6.2 in.) |
| ALT11G23CBH4 |
190 mm (7.4 in.) |
514 mm (20.2 in.) |
320 mm (12.5 in.) |
| ALT11GNW25CBH4 |
190 mm (7.4 in.) |
514 mm (20.2 in.) |
320 mm (12.5 in.) |
| ALT11G23CDH4 |
190 mm (7.4 in.) |
519 mm (20.4 in.) |
320 mm (12.5 in.) |
| ALT11G23DDH4 |
190 mm (7.4 in.) |
437 mm (17.2 in.) |
320 mm (12.5 in.) |
| ALT11GA25ABH4 |
190 mm (7.4 in.) |
517 mm (20.3 in.) |
320 mm (12.5 in.) |
| ALT12G23CBH4 |
190 mm (7.4 in.) |
765 mm (30.1 in.) |
570 mm (22.4 in.) |
| ALT13G23CBH4 |
190 mm (7.4 in.) |
1039 mm (40.9 in.) |
820 mm (32.2 in.) |
| ALT13GNW25CBH4 |
190 mm (7.4 in.) |
1039 mm (40.9 in.) |
820 mm (32.2 in.) |
|
Typical Water Flow Rates5
.
1Nitronic is a registered trademark of Armco Inc.
2With compatible fluids, which do not soften, swell or adversely affect the materials.
3Full vacuum.
4These part numbers represent the most commonly used housing variants with the shortest lead times. Many other variants are available (see ordering information). Please contact Pall for further information.
5The flow and pressure drop characteristics refer to the empty housing only for water at 20 °C (68 °F). For other liquids multiply pressure drop by relative density. To obtain the total pressure drop of a complete filter assembly, the cartridge pressure drop must be added. Please refer to the relevant filter cartridge literature or contact Pall.
This information is a guide to the part number structure and possible options. For availability of specific options and housing details, please contact Pall.
Example Part Number: ALT
D 1
2 G
A25 A D H4
6 (See bold references in tables below)
Part Number: ALT < Design Code from Table 1 > 1 < Cartridge Code from Table 2 > G < Inlet/Outlet Code from Table 3 > < Vent Code from Table 4 > < Drain Code from Table 5 > H4
Table 1 - Design
|
| - |
To European Pressure Equipment Directive |
| D |
To European Pressure Equipment Directive with enhanced documentation including 3.1b stamped material and certification |
|
Table 2 - Cartridge Type
|
| 05 |
AB05 code 2 |
| 1 |
AB1 code 7 |
| 2 |
AB2 code 7 |
| 3 |
AB3 code 7 |
|
Table 3 - Inlet/Outlet
|
| 23 |
1 in. sanitary flange to ISO 2037/BS 4825 |
| NW25 |
Dairy fitting NW 25 to DIN 11851 |
| A25 |
Aseptic thread connection NW 25 to DIN 11864-1 |
| 94 |
33.7 O/D x 2.0 mm wall butt weld to ISO 1127 |
|
Table 4 - Vent
|
| A |
Sanitary valve fitting for Stäubli type couplings |
| C |
ISO 2037/BS 4825 with side sanitary valve with quick release fitting for Stäubli type couplings |
| D |
1⁄2 in. sanitary flange to ISO 2037/BS 4825 |
| E |
ISO butt weld 13.5 x 1.6 mm to ISO 1127 |
|
Table 5 - Drain
|
| B |
Sanitary valve with hosebarb |
| D |
1⁄2 in. sanitary flange to ISO 2037/BS 4825 |
| N |
No drain |
|
6Silicone elastomer seal material. other materials available upon request.
Print Product Information
E-Mail
Download PDF
