Pall Advanta™ Jacketed Housings

Jacketed Filter Housings are fabricated with either T-Type or In-Line flow designs and AB style Code 7 fitting configurations for single open-ended (SOE) sanitary AB style filter cartridges. They offer the added feature of a 316L stainless steel jacket for temperature control using hot water or steam, and are suitable for gas service or liquid flows to 20 gal/min (75 L/min) with minimal pressure drops.

Features

• Corrosion resistant 316 L Stainless steel jacket for temperature control
• In-Line or T-Type flow designs
• Entire housing electropolished
• Internal surfaces with < 0.4 µm (< 15 µin.) Ra surface finish
• External surfaces with < 0.8 µm (< 32 µin.) Ra surface finish
• Low hold-up volume - maximizes product recovery
• Easy-draining features, including downward sloping internal contour and low-point drain - allows easy removal of CIP solution or product
• Fewer welds - results in an extremely sanitary design
• Automated orbital welding - produces consistent high quality welds
• Non-rotating vent and drain - prevent twisted hoses and allow hard piping
• Manufactured for use in conformance with cGMP
• 3-A Sanitary Standard Symbol for optimized CIP/cleanable design
• Manufacturing Quality System Certified to ISO 9000 Standards

Materials of Construction

• Housing: 316L stainless steel
• Jacket: 4.9 barg at 140 °C (72 psig at 284 °F)
• Inlet and Outlet Connections: 1 1⁄2 in sanitary coupling
• Jacket: 1⁄2 in. NPT
• Standard Gasket O-ring Material: Ethylene Propylene

Design Pressure and Temperature

• 10 barg at 140 °C (150 psig at 284 °F)

Jacket

• 4.9 barg at 140 °C (72 psig at 284 °F)

Nominal Diameter

• 114.5 mm (4 1⁄2 in.)

Number of Cartridges

• 1

Cartridge Style

• AB Code 7

Legs and Support

• ALT: Stand available
• ALI: None
• Closure Style: Vee-band clamp

Flow Configuration

• ALT: Tee
• ALI: In-Line

Operating Conditions

• Maximum Operating Pressure: -1¹ to 10 barg (-14.5¹ to 150² psig)
• Maximum Operating Temperature: 150 °C (300 °F)

Typical Water Flow Rates

¹Full vacuum.
²With compatible fluids, which do not soften, swell or adversely affect the gasket materials.

This information is a guide to the part number structure and possible options. For availability of specific options and housing details, please contact Pall.

Example Part Numbers:
   ALT1 1 J23 B N H4
   ALI1 1 J23L B N H4
   (See bold references in tables below)

Part Number: ALT1/ALI1 < Cartridge Code from Table 1 > J23/J23L < Vent Code from Table 2 > < Drain Code from Table 3 > H4

Table 1 - Cartridge Type

Code	Cartridge Type
1	AB1 code 7
2	AB2 code 7
3	AB3 code 7
4	AB4 code 7

Table 2 - Vent

Code	Vent
A	Sanitary valve with quick-release coupling
B	Sanitary valve with 8 mm (0.314 in.) hosetail
C	ISO 2037/BS 4825 with side sanitary valve with quick release fitting for Stäubli type coupling
D	1⁄2 in. sanitary flange to ISO 2037/BS 4825
N	None

Table 3 - Drain

Code	Drain
B	Sanitary valve with 8 mm (0.314 in.) hosetail
D	1⁄2 in. sanitary flange to ISO 2037/BS 4825
N	None