Ihre Browserversion wird nicht unterstützt. Bitte aktualisieren Sie Ihren Browser. Schließen

Primary Metal Material Directional Control

Explore Pall filtration technology for primary metal producers

Equipment Reliability and Improved processes

Material Directional Control

In metal production, material is sent through a production process. This allows for the metal to be shaped via forging, extrusion, or some other process. The shaping of metal is essential for the production of tubes, structural beams and other products that come from metal. Producers are under constant pressure to increase profitability and quality while decreasing costs and environmental impact.


Continuous Casting. Continous Solutions.


The process of hot rolling involves metalworking above the recrystallization temperature of the metal being worked. After the grains deform during this process, they will recrystallize if the temperature is low enough. If this recrystallizing occurs, the result is a microstructure that prevents the metal from hardening.  If this were to occur during the production of a steel beam for buildings, it could be a disaster.


Most metalwork starts out as large piece of metal such as slabs, billets or blooms. These products are often the result of continuous casting operations, and the products are generally fed directly into the rolling mill at the proper temperature. In a small metal production environment, the metal starts at room temperature and heating is required via gas, or oil fired soaking pits, in some cases induction heating is used.


As this material is worked the temperature needs to be maintained above the recrystallization temperature, usually this is 50–100 C or 90 to 180 F.  If the temperature drops below this range, then it must be reheated before it can continue to be worked.

Metals processed this way generally have little directionality, however in some instances non-metal particles will impart directionality on the metal. This results in a non-uniform shape. The metal is still good quality, but the mill scale covering the metal needs to be removed. 

We have responded to industry needs with a variety of products    

Maxamized service life


Pall’s Athalon hydraulic and lube oil filters offer the ultimate performance. These filters combine Betax(c)≥2000 rated, stress resistant technology, and a full range of housings to provide superior performance. Athalon filters are laid over pleat (LOP) geometry.  This allows for maximization of the filtration area, increased flow handling, reduced filter element size, and improved fluid cleanliness across the filtration process.


Zudem verbessert dieser Filter die tatsächliche Leistung über eine antistatische Konstruktion, wodurch eine statische Beschädigung der Filterelemente, Gehäuse oder Flüssigkeiten verhindert wird. Athalons Konstruktion ohne Ummantelung macht das Filterelement 60 % leichter als vergleichbare Filterelemente und verringert die Entsorgungskosten.  Athalon Filterelemente können zur Entsorgung gepresst, verbrannt oder geschreddert werden. Der Filter ist einfach und kostengünstig zu installieren oder warten, da er gemeinsame Anschlüsse und Montageschnittstellen verwendet.


A filter’s ability to sustain fluid cleanliness for its entire service life is a critical measure of performance. Athalon Athalon is the only filter that continues to provide quality fluid cleanliness, even late in service life.


Pall’s Coralon Series


Pall’s Coralon series has been demonstrated to produce 15X cleaner fluids and 16X more consistent performance over the service life of the filter, providing a savings of 20% in overall filtration cost. The Coralon filter produces consistent performance for the full service life. Testing shows there is no drop in efficiency or performance, unlike competitor products, unless the filter is blocked. Blocking means that the filter has been working to remove contaminants from the product being filtered. It is the most advanced filter media available for lube and hydraulic fluid applications on the market today.


Red 1000 Series


This series is designed to assist customers that need to upgrade competitor filter housings. It is part of the Coralon series and provides an economical solution to consumers that are looking for advanced protection of critical system components, but aren’t ready to change their filters to a Pall product.


For more information about Pall filtration technology for primary metal producers, click here to contact one of our experts.

Wie können wir helfen?

Wenn Sie nach innovativen Filtrationslösungen suchen, sind Sie hier richtig. Unsere sachkundigen Experten sind für Sie da. Kontaktieren Sie uns, wenn Sie weitere Informationen erhalten möchten. Wir freuen uns darauf, Ihnen schon bald zu helfen.